Call Now!

888-562-5691


888-lock-ny1
Our Emergency Service is Available!

Tag Archives: deadbolt locks

  • Installing a Deadbolt Lock

    Posted on December 17th, 2013 0 Comments

    A deadbolt lock is one of the most effective and easy ways to add more security to your home and achieve peace of mind. Installing a deadbolt for the first time can seem difficult and even a bit confusing. Once you get the hang of it, you will find that it truly is the easiest way to enhance your home security. Follow these simple installation steps to install your new deadbolt.

    Determine the Setback of the Deadbolt

    A setback is the location of a deadbolt on a door frame, in relation to the standard door lock. Most people place deadbolts roughly six inches above the standard lock. Measure and mark where you will place your new deadbolt.

    Drill Holes for the Deadbolt

    Drill a hole that is roughly 1 1/2 inches wide over the area that you marked. A hole saw may be used to do this. After you have drilled the hole, check and see if it reached the other side of the door. If not, you will need to use a bit to drill through the other side of the door.

    After drilling the hole through the door, you will need to drill another hole into the center of the door’s edge. Use a 7/8 inch spade bit to do this. Drill an additional 3/8 inch space near the backside of it.

    Secure the Deadbolt

    Before attaching the deadbolt, secure the bolt inside the hole located in the edge of the door. Mount the plate with two screws. Carefully insert the deadbolt cylinders, ensuring that they are correctly placed. Secure the driver bars with screws. Drill two 7/8 inch holes that are roughly 1 inch deep on the doorjamb. Make sure it is flush with the center of the bolt location. Attach the deadbolt plate in place using screws.

    Attaching a deadbolt properly is not difficult, but does require a few tools. Make sure that you have the proper equipment prior to attempting to install a new deadbolt. Take your time with the installation, and make sure that the holes are even and chiseled. This will ensure that your new deadbolt has the best possible fit and will work properly.

    Share Button
    Author:
  • How to install a Surface Mount Deadbolt Lock

    Posted on December 10th, 2013 0 Comments

    1. Choose a surface deadbolt lock appropriate for your door material. Metal door lock kits will include metal-tapping screw. Go to your local locksmith in Chicago or hardware store if you got a lock make for wood and not metal, they will decide on the appropriate screws.  
    2. Secure the location installation template to the door frame or the desired place you need to place the lock. Mark the exact location for each screw by pressing a pencil or pen at exact the location through the template.
    3. Pull the trim off the top of the lock and line the mounting holes up with the marks. Screw the mounting screws through each hole, and then repeat the process to mount the strike plate on the door trim.
    4. Place the trim cover over the top of the lock and secure it with the trim screws.

    To have a licensed locksmith company in Chicago Install a surface mount deadbolt lock contact www.chicagolocksmiths.net

    Share Button
    Author:
Evicted - we provide eviction services throughtout Westchester County and New York City Find Out More
©Copyright 2010 ChicagoLocksmiths.net | All Rights Reserved